Unless you work in an auto shop, dealing with dead car batteries is probably not a daily occurrence. Seen in this light, buying a tool with the sole function to jump-start a car is not a very practical decision.
A better move is to buy a multifunctional tool that not only jumpstarts vehicles with ease but one that could also be used for other tasks. And we found an option that fits this bill – the NOCO Boost Plus GB40 Jump Starter.
Even if you have multiple cars, it won’t be an issue for this compact tool to start all of them. It packs enough power that you can start up to 20 vehicles in one go before you’ll need to recharge this jump starter.
Noco jump starters are good enough to jump-start your vehicle without needing another vehicle. These gadgets are portable and can fit into your toolbox easily to give easy access for jump-starting your vehicle in emergency situations. Noco is just exactly what you need to give another life to your battery!
The Noco GB40 can hold charge according to its battery capacity for up to 1 year. For attaining the best ideal performance, charge your device every 4 months after the preliminary charge cycle. A brand new device will hold a charge for two or three months before going dull.
Yes, Noco GB40 can be overcharged as it has built-in overcharge protection. Due to this factor, it can be connected to the charger all the time and still will not go bad. Although it is never endorsed to anything on charge forever if left overnight or for a day or two, it will be fine.
The standard amps required to jump-start most car engines are 400 to 600 amps. But in the case of cars with larger engines, up to 1000 to 2000 amps can be required. However, jump starters with different Amp settings are available and you can choose them according to your necessity.
The best thing for a car owner to own is a good lithium jump starter. It is powerful yet portable, compact, and lighter in weight as compared to lead-acid jump starters. For most lithium jump starters, the average life span of a jump starter’s battery is 5 to 6 years. They can last longer if they are in good hands!
This is a fully functioning jump-starter that, in addition to jump starting your vehicle in emergencies, can also be used as a power bank for charging other devices and as an emergency flashlight with SOS, strobe, low, medium, high and flashing modes. It also has reverse polarity protection to keep it safe from accidental sparks during jump-starting.
Very powerful – Can start up 6.0 liters gas engine and 3.0 liters diesel engines. Also, it can be used to start most types of vehicles such as cars, trucks, boats, SUVs and ATVs.
Very safe yet powerful – Sparks are eliminated and it has a built-in overcharge protection that prevents it from being overcharged.
Price – It’s costlier than other similar products in the market. Some buyers who received defective ones have to go through hoops to get their money refunded.
Size – It’s quite large and bulky for a product its size, making it very inconvenient for travel.
It’s powerful and offers a lot of features that make it convenient to own. It could be used in an emergency to start your car or the engine of another vehicle. If you ever get stuck out of gas or stranded in an unknown area, this will be your life saver!
The NOCO Boost Plus GB40 can be bought from the official site of NOCO. You can also check out other reliable sites for reviews and feedback on this product. It can also be bought online through Amazon.
Tools being used in this process: one vehicle's battery and the other one's engine starter.
First, we need to make sure that both batteries are of a similar voltage and amperage ratings: approximately 12 volts for domestic vehicles, and 13.8 V DC (three-phase) for commercial vehicles; most trucks will require 14 V at least).
The driver must then park his vehicle in a safe area, get out of the vehicle, and place the booster between the two batteries. The electrical terminals of this device should be facing the same way as that of the batteries.
Next, using a jumper cable or lead wire fitted with clamps/clasp/clips (whatever you want to call them), connect one end to an external point on your car battery. Then, connect the other end of that cable to one terminal of your NOCO GB40. And, finally, connect the other cable from your GB40 to the positive terminal of your car battery.
In a similar manner, attach another jumper cable or lead wire to an external point on your car battery. This time, attach the other end to one terminal of your NOCO GB40. Then, connect the other free end of that jumper cable to a negative terminal on your car battery. And finally, attach the other lead cable to one terminal of your engine starter.
Start the engine and let it run for a second or two, then remove the jumper cables. And you're done! It's time to jump start your vehicle.